CONTINUE TO SITE
The Future of Fire Detection
Total System Approach To Protection
GF-5201R Series Intelligent & Networking FACP
The GF-5201 series is a versatile range of open protocol fire alarm control panels compatible with existing eLAN fire alarm panel technology. Each GF-5201 panel SLC operates an intelligent open protocol for Apollo Fire Detectors, both XP-95 and Discovery series detectors and modules. This allows ESDs and end users several options for parts and service. The GF-5201 panels are available with one or two detection loops capable of hosting up to 252 devices on a single panel, 31,750 points on a network. They incorporate leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity.
UL listed, FM Approval pending, CSFM Listing pending, MEA/COA Accepted
5 year warranty from date of ship
One full SLC circuit (126 points) expandable to two (252 points)
3 programmable relays
5.25A power supply
2 Programmable NAC circuits with internal synchronization support
Large graphic display
Real time clock
Compatible with eMATRIX graphics annunciator
Powerful, network wide cause and effects (500 Total).
Fully user programmable by point or zone.
Can be networked with 126 additional GF-5200 series FACPs
Positive look and feel
Stores 1000 last events in event log
Model ranges include with or without a Dual-Line internal DACT, SIA or Contact ID formats
Available in Red or special order in Gray
Programming available through PC connection or through the internet
Virtual panel feature through LAN, allows your PC to mimic the front keypad & graphic display
Construction: 16AWG sheet steel
Dimensions: 14.5”W x 18.9”H x 4.25” D
Weight (without batteries): 20lb
Finish (lid & box): RAL3002 (Red) or (Gray)
Finish (product labels): BS 00 A 05 (Gray)
Mains voltage supply: 110 or 230V AC 50 or 60 Hz. (specify when ordering, default is 110V)
Mains supply fuse: 1.6A 250V
Power supply DC rating: 24V 5.25 Amps
Aux 24V supply: Fused at 500 milliamps
Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)
Fault contact rating: 30V DC 1 Amp
Fire contact rating: 30V DC 1 Amp
Alarm contact rating: 30V DC 1 Amp
NAC output rating: 3.1V across both channels, 2.3V across any one
Detection loop: 250 milliamp output
Printer port: Serial RS232
Serial expansion port: Serial RS485
PC port: Serial RS232
Network connection: Optional network card allows the use of e-NET networking ot VesNet networking
NAC Synchronization: Internal Support
XP95A Priority Switch Monitor Module
The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.
Three input states – ’normal’, ’trouble’, and ’alarm’
Fast response time
XP95A Mini Priority Switch Monitor Module
The XP95A Mini Priority Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.
Three input states – ?normal?, ?trouble? and ?alarm?
Visible LED with remote LED connection option
Designed to fit into equipment with limited space
Easy to install
Monitors equipment where a fast response is required
For more information and news, please visit the VES Fire Detection Systems website.