The GF-5201 series is a versatile range of open protocol fire alarm control panels compatible with existing eLAN fire alarm panel technology. Each GF-5201 panel SLC operates an intelligent open protocol for Apollo Fire Detectors, both XP-95 and Discovery series detectors and modules. This allows ESDs and end users several options for parts and service. The GF-5201 panels are available with one or two detection loops capable of hosting up to 252 devices on a single panel, 31,750 points on a network. They incorporate leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity.

UL listed, FM Approval pending, CSFM Listing pending, MEA/COA Accepted

5 year warranty from date of ship

One full SLC circuit (126 points) expandable to two (252 points)

3 programmable relays

5.25A power supply

2 Programmable NAC circuits with internal synchronization support

Large graphic display

Real time clock

Compatible with eMATRIX graphics annunciator

Powerful, network wide cause and effects (500 Total).

Fully user programmable by point or zone.

Can be networked with 126 additional GF-5200 series FACPs

Positive look and feel

Stores 1000 last events in event log

Model ranges include with or without a Dual-Line internal DACT, SIA or Contact ID formats

Available in Red or special order in Gray

Programming available through PC connection or through the internet

Virtual panel feature through LAN, allows your PC to mimic the front keypad & graphic display

Construction: 16AWG sheet steel

Dimensions: 14.5”W x 18.9”H x 4.25” D

Weight (without batteries): 20lb

Finish (lid & box): RAL3002 (Red) or (Gray)

Finish (product labels): BS 00 A 05 (Gray)

Mains voltage supply: 110 or 230V AC 50 or 60 Hz. (specify when ordering, default is 110V)

Mains supply fuse: 1.6A 250V

Power supply DC rating: 24V 5.25 Amps

Aux 24V supply: Fused at 500 milliamps

Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)

Fault contact rating: 30V DC 1 Amp

Fire contact rating: 30V DC 1 Amp

Alarm contact rating: 30V DC 1 Amp

NAC output rating: 3.1V across both channels, 2.3V across any one

Detection loop: 250 milliamp output

Printer port: Serial RS232

Serial expansion port: Serial RS485

PC port: Serial RS232

Network connection: Optional network card allows the use of e-NET networking ot VesNet networking

NAC Synchronization: Internal Support

The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.

Three input states – ’normal’, ’trouble’, and ’alarm’

Visible LED

Loop-powered

Fast response time

Interrupt facility

The XP95A Mini Priority Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.

Three input states – ?normal?, ?trouble? and ?alarm?

Visible LED with remote LED connection option

Loop-powered

Designed to fit into equipment with limited space

Easy to install

Monitors equipment where a fast response is required

Interrupt facility