The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1515 is available in surface mount style only while the 1506 series keypad is available in surface or flush mount styles. The 1504 model adds an intercom substation to the 1506 series allowing voice communication via connection to a master intercom station. Lighted keypad models available for easy night time operation.

Ideal for controlling doors or gates.

Add or delete individual codes from the keypad (1506).

Add or delete individual codes from an Android Smartphone using the DKS App (1515 only).

"Hold" codes to latch open a door or gate.

EEPROM Memory.

LED Lighting.

Lighted keypad.

Combines the 1515 or 1506 keypad into a common housing with an intercom sub-station. This sub-station may not be compatible with all intercom systems.

Dimensions: 6.125″H x 10″W x 5.25″D.

Stores up to 1000 4-digit entry codes.

Six 5-digit entry codes.

Two Form C dry contact relays.

Time zone inputs.

Secondary keypad capability.

Operates on 16 volt AC power.

Dimensions: 6.25″H x 5.25″W x 4.375″D.

Dimensions Flush Mount: 8.375″H x 7.125″W x 4″D.

Stores up to 400 codes, 4 or 5 digit.

Program from the keypad or from an Android Smartphone with the DKS Manager App.

Wrong code lockout settable from 3-9 tries and 1-9 minutes.

Low power mode for solar applications.

Single Form C dry contact relay.

Operates on 12 to 24 volt AC or DC power.

Dimensions: 5.375″H x 4.5″W x 3.687″D.

Electric strikes offer an economical way to secure standard doors and are suitable for most cylindrical door locks. Fail-safe and fail-secure strikes are available. Electric dead bolts provide superior security and safety and include fail-safe operation for doors. Dead bolt options include lock sensor, door sensor or lock and door sensor models to indicate status of the lock (locked, unlocked) and/or door (open, closed).
These electric strikes and dead bolts are designed for indoor use only.

DKES-C1-1FX: fail-secure 11/32 keeper

DKES-C1-1FS: fail-safe 11/32 keeper

DKES-C2-1FX: fail-secure 5/8 keeper

DKES-C2-1FS: fail-safe 5/8 keeper

12 Volt DC, 400 ma.

DKEB-M-1: standard dead-bolt

DKEB-M-1L: with lock sensor

DKEB-M-1D: with door sensor

DKEB-M-1LD: with lock and door sensor

5/8 stainless steel bolt with 5/8 throw

Built-in reverse polarity protection

12 Volt DC, 300 ma stand-by; 900 ma operate

The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader (DK Prox, AWID or HID) or can be ordered as a single door controller allowing the user to add their own 26-bit access control device.

The 1524 is available only with a DK Prox card reader. Contact your professional DKS system installer for more information about this and other DKS products.

Features:

Built-in proximity card reader (available with DK Prox, AWID or HID reader)

Available as a controller only (add your own 26-bit wiegand device)

Built-in programming keypad

Indoor or outdoor use

Specifications:

Stores up to 1000 card codes

Transaction buffer stores last 3600 events

Timed anti-pass back (1-59 minutes)

Four time zones

Clock and transaction buffer maintain data for up to 3 days in the event of a power outage Print Menu.

Real time print mode.

Form “C” dry contact relay

16 VAC, 20 VA power transformer supplied.

Features:

Built-in DK Prox card reader

Program with a hand held programmer or with programming cards

Available as a mullion mount or with an outdoor enclosure

Indoor or outdoor use

Specifications:

Stores up to 1000 card codes

Form “C” dry contact relay

12 VDC power supply included

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.

Self-adjusting, no maintenance magnetic limits.

Overlap feature for dual swing gate operation.

Designed with a built-in primary and secondary entrapment prevention system.

Ports for plug-in loop detectors.

Two convenience outlets.

Fail-safe release.

Tamper detect circuit.

Gate tracker reporting output.

Programming switches.

Built-in reset switch.

Built-in power On/Off switch.

Model 6300 with 1 HP Motor

Maximum gate width 22-feet.

Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

Swings gate 90 degrees in approximately 15-seconds.

1 HP continuous-duty motor.

115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

Class I, II, III and IV applications.

Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment prevention devices need to be installed with this gate operator.

The new DKS 6524 Swing Gate Operator keeps running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable and allows you to add your own solar system for power, or you can choose the DKS solar kit. This swinmg gate operator offers convenience, reliability and safe operation in a small, compact design and is ideally suited for residential or commercial applications. The 1/2 HP Quadra Drive DC Motor provides powerful and long lasting operation and is backed up with built-in 7.2 Ah batteries to provide operation if AC power is interrupted. For longer backup operation, optional 18 Ah batteries can be chosen for up to 150 gate cycles*. The 6524 features a pully / belt drive 60:1 worm gear-box reduction system to provide powerful, yet extremely quiet, slide gate operation. The 6524 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, the DKS Model 6524 provides everything you expect from a gate operator in this class – and more.

Heavy-duty gearbox

Heavy-duty steel frame provides strength and quiet operation

7.2 Ah batteries standard; 18 Ah batteries optional

Easy adjustable electronic magnetic limit switches

Auto-close timer 1-30 seconds

Gate overlap feature for dual (bi-parting) gate operation

Selectable shadow/reverse loop function

DC Power Shut-Off switch

Battery protection circuit

Ports for plug-in open and reverse loop detectors – DKS detectors only

Gate Tracker reporting output provides operator data to access control system (DKS 1833, 1835, 1837 or 1838 only)

Maximum gate width 16-ft.

Maximum gate weight 800 pounds*. (*Assumes gate swings in a level arc, in good condition with properly adjusted hardware.)

115 / 230 VAC input: 1.8A / 0.9A. 24 VDC input: 8 Amp

Class I, II, III and IV applications.

Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment prevention devices are required to be installed with this gate operator.)

Dimensions: 20.5″W x 38.5″H x 30″D (52cm W x 97.8cm H x 76.2cm D)

The new DKS 9024 Slide Gate Operator keeps running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable and allows you to add your own solar system for power, or you can choose the DKS solar kit. This slide gate operator offers convenience, reliability and safe operation in a small, compact design and is ideally suited for residential or commercial applications. The 1/2 HP Quadra Drive DC Motor provides powerful and long lasting operation and is backed up with built-in 7.2 Ah batteries to provide operation if AC power is interrupted. For longer backup operation, optional 18 Ah batteries can be chosen for up to 150 gate cycles*. The 9024 features a belt drive/30:1 gear-box reduction system to provide powerful, yet extremely quiet, slide gate operation. The 9024 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, the DKS Model 9024 provides everything you expect from a gate operator in this class – and more.

Two 7.2 Ah Batteries standard, 18 Ah batteries optional

Powerful 1/2 HP Quadra Drive motor for long life

Heavy-duty gearbox

Heavy-duty steel frame provides strength and quiet operation

“T-Handle” release is easily accessible from front of operator

Operator re-connects automatically when handle is released

Adjustable partial open limit

Adjustable limit nuts for precise gate control

Auto-close timer 1-30 seconds

Simple bi-parting gate interface (AC powered operators only)

Selectable loop/reverse input function; stop or reverse

Anti-tailgating feature helps to control un-authorized traffic

Standard normally closed stop circuit

DC Power Shut-Off switch

Battery protection circuit

Ports for plug-in open and reverse loop detectors – DKS detectors only

Gate Tracker reporting output provides operator data to access control system (DKS 1833, 1835, 1837 or 1838 only)

AC Powered Operator Only – 115 VAC Convenience outlets, and AC Power Shut-Off switch.

DC Powered Operator Only – 0.0 Amp SBPD(PatPend) Circuit insures longer battery life.

Maximum gate width 40 ft. (12.2 m)

Maximum gate weight 1000 pounds (453.6 m). (Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

1/2 HP Quadra Drive motor, continuous operation with AC source power available.

With battery backup approximately 40 cycles with 7.2 Ah Batteries, 150 cycles w/18 Ah Batteries. Assumes a 16-ft, 1000 Lb gate.

Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles.

115, 230 VAC input: 1.8 A / 0.9 A or 24 VDC Input 8.0 A.

Class I, II, III, IV applications

Compliant with UL 325 and 991, ETL Listed.

Dimensions: 16.75″W x 28″H x 19″D (42.5cm W x 71cm H x 48.3cm D)